TOPIC EXPLAINER · OPERATIONS CORE

APC, Yield & Metrology: The Fab Control Loop

How a fab watches, controls, measures, and explains yield: SPC, FDC, APC, metrology, and defect analysis — as a teaching model.

Foundational Demarcation

Six Core Concepts: Distinguishing Roles & Boundaries

Clear demarcation between statistical monitoring, equipment fault detection, run-to-run parameter tuning, dimensional verification, defect attribution, and yield aggregation.

Concept Formal Definition Key Mechanism Division of Scope
End-to-End Architecture

The Engineering Closed Loop: From Tool Execution to Yield Analytics

Step-by-step causal flow: sensor telemetry through FDC/SPC, APC recipe adjustments, metrology verification, defect Pareto analysis, and MES lot disposition.

Closed-Loop Process Step Inventory

Statistical Process Control

Interactive SPC: Baseline Calculation, Drift & Nelson Rules

Observe how control limits are strictly derived from the stable baseline segment (Mean ± 3σ), and verify how trend drifts and single-point outliers trigger simplified Nelson rules.

View Mode:
Baseline Mean (x̄)
50.000
Calculated over Lots 1–10
Sample StDev (s)
0.200
ddof=1, N=10
Control Limits (UCL / LCL)
50.600 / 49.400
Mean ± 3 × Sample StDev
Rule 1 Trigger Status
Triggered (Lot 19)
Value 51.200 > UCL 50.600
Fault Detection & Classification

Interactive FDC: In-Situ Sensor Deviation & Alarm Interlock

Compare nominal chamber pressure traces against faulty deviations to understand how consecutive-point persistence triggers tool health alarms.

Trace View:
Advanced Process Control

Interactive APC Run-to-Run: Proportional Recipe Feedback

Adjust post-etch critical dimension (CD) measurements to observe how proportional feedback updates the recipe setpoint for the next incoming lot.

Target Dimension (y_target)
50.0 nm
Nominal specification
Measured Error (y - y_target)
+2.0 nm
Dimensional overshoot
Adjustment (Δu = -0.5 × Error)
-1.0
k = 0.5 teaching gain
Next Lot Recipe Setting
99.0
Base 100.0 + Adjustment

APC Control Mode Operational Mechanism Fab Use Case
Process Verification

Inline Metrology & Inspection Types: Scope & Trade-offs

What each technique physically measures, when it is scheduled in the process flow, and its physical/throughput constraints.

Technique What It Measures When It Is Used Limitations
Defect Analytics

Defect Pareto & Wafer Map: Directional Signatures

Explore the 80/20 distribution of defect categories and click to inspect corresponding wafer surface signature patterns.

Defect Category Pareto (N=100) · Click bars to switch map

* Teaching preset counts: Particle 35, Scratch 20, Pattern defect 18, Contamination 15, Other 12 (Total 100, cumulative 35%, 55%, 73%, 88%, 100%).

Center Cluster

Illustrative, Not a Diagnosis

Yield Accounting

Yield Waterfall Structure: Additive Loss Accounting

An illustrative arithmetic walkthrough showing how wafer starts progress through process scrap, defect losses, and hold rejections to final output.

Ecosystem Integration

Neighboring Fab Systems: Handshakes & Boundaries

How APC, FDC, and metrology integrate with MES, connectivity conduits, equipment PLCs, and enterprise yield management.

Neighboring System Core Operational Role Boundary & Handshake
Industry Landscape

Representative Vendor Landscape

Commercial process control software platforms and inline metrology equipment manufacturers.

Representative vendors for teaching only, in alphabetical order; not a ranking, not exhaustive, not an endorsement.
Category Representative Vendors Primary Domain

Vendor names do not imply actual deployment in any specific fab; individual vendors often span multiple functional categories.

Knowledge Reference

Glossary of APC, Yield & Metrology Terms

Essential terminology for process control, equipment health monitoring, and defect analysis.

Term Full Name Plain Definition
Screen Reader & SEO Reference

Complete Accessible Text Edition

Full static reference of the closed loop, SPC baseline values, FDC rules, APC worked example, Pareto counts, and yield waterfall without JavaScript.

Conceptual Check

Interactive Knowledge Check

Three conceptual questions to verify your understanding of SPC vs FDC, APC feedback/feedforward, and wafer map interpretation.